Through our online store, we offer a number of roof anchor systems to meet a wide variety of applications and our experienced sales team can help determine the system for your needs.
Continuous Protection and Mobility
This roof anchor provides 360 degrees of protection and mobility for up to three workers. With three independent and rotating anchor points elevated off the roof deck, it is ideal for use with self retracting lifelines (SRL's). The SRL's lifeline extends as the worker moves away, and automatically retracts as the worker moves towards the device providing complete "hands-free" mobility while reducing snagging, dragging and trip-fall hazards. In the event of a fall, the SRL locks quickly reducing overall fall clearances and forces for added safety. With variable length SRL's available, a multiple user rated anchor and 360 degrees of mobility, this system is simply the ultimate in roofing safety and productivity!
Fast and Efficient Installation
The 3-man roof anchor sets-up in only minutes. The unit is expanded from its storage/collapsed position, then the legs and anchorage mast are pinned into place. Finally, the roof anchor is fastened down through the wood sheathing and into the trusses using sixteen 3-1/2" #8 deck screws (4 screws per foot). The anchor's integrated articulating feet allow it to be mounted to a range of pitched wood roof structures from 4-12 to 12-12. Removal of the anchor is just as quick, and its compact storage design makes transport and relocation easy.
Load Distributing Design
With a unique load distributing and shock absorbing design that deforms in the event of a fall, the anchor will help dissipate the energy from the fall evenly to the roof, reducing the chance of damage to the roof structure. This design also reduces the number of fasteners required (four per foot) to install the anchor to the roof, saving valuable time! Incorporates 3 independent anchorage points for simultaneous use by 3 workers for added jobsite versatility.
Complete Jobsite Flexibility
The DBI-SALA Roof Top Anchor for Metal/Wood Sheathing's design makes the anchor very versatile in terms of what it can be attached to on the jobsite. Whether it is 24 gauge or thicker corrugated metal decking with ribs that are 10" to 20" apart, 5/8" CDX plywood or concrete, this anchor can be mounted to all with minimal amount of fasteners compare to the competition. All of these options are available with one base and stanchion unit to suit your specific jobsite needs.
Specialized Load Distributing Design
During a fall when the Roof Top Anchor is loaded, the stanchion tips over properly distributing the fall arrest forces to the base and fasteners. This specialized design provides added safety to the worker attached and distributes the forces to the structure. By limiting the forces this way, the integrity of the roof is also preserved.
Fast, Simple and Safe Tie-off Point
This anchor installs quickly and efficiently providing a safe fall arrest rated anchor point. Because of its "tip-over" load distributing design, the anchor can be attached to the roof structure without needing to attach or fasten to a structural member. Therefore, the anchor can be directly fastened to the roof panels with approved fasteners (see instruction manual for further details).
Single or Multi-Person Use
For single person use, simply attach your shock absorbing lanyard, self retracting lifeline or rope and rope garb system and your ready to go. You can also install a Sayfline horizontal lifeline system between two anchors providing a safe tie-off point for two workers.
Safe and Secure Anchor
The freestanding counterweight anchor provides a tie-off point for personnel performing work on fl at roofs or structures. The anchor is fall arrest rated and can be used as a single anchor point system. After set-up, simply attach your shock absorbing lanyard, self retracting lifeline or rope grab and lifeline and you are ready to go.
This anchor is a counter- weight type, simply placed on top of the working surface. Weighted bases are added to rubber trays that are connected to a shock absorbing tie-off post. The anchor's freestanding design installs without penetrating the roof sheathing or surface, saving valuable time and money. In addition, the design reduces the possibility of surface damage, roof leaks and voided roof warranties.
Specialized Load Distributing Design
This anchor incorporates a revolutionary shock absorbing system called LEAP™. The LEAP™ post (with tie-off point) has an integral energy absorber that deploys in a controlled manner to absorb the forces generated during a fall. This specialized design provides added safety to the attached worker and better distributes the forces to the anchor and structure. By limiting the forces this way, the integrity of the roof is also preserved.
Installation of the anchor system is simple, fast and efficient. Due to its modular design, the installer will never have to lift more than 45 lbs. (20.3kg). In some applications, the entire system can be lifted (by forklift or crane) into place for instant set-up and use.
When you are up on a structural standing seam roof, whether flat or sloped, your fall protection system needs specialized components to keep you safe without damage to rooftops. DBI-SALA's easy to use roof anchor provides the solution and can be reused on many different roofs. No matter what you are connecting to, DBI-SALA has a connector to get the job done and keep you safe in case of a fall.
When you are out on the roof of a residential or commercial wood or metal frame structure, whether flat or sloped, your fall protection system needs specialized components to keep you safe and secure without causing damage. DBI/SALA's easy to use, economical roof anchor kits and anchorage components provide the perfect solution and meet the latest OSHA and ANSI standards. Know matter what you are connecting to, DBI/SALA has a connector to get the job done and keep you safe in case of a fall.
When you are out on the roof of a residential or commercial wood frame structure, whether flat or sloped, your fall protection system needs specialized components to keep you safe and secure without causing damage. DBI/SALA's easy to use, economical roof anchor kits and anchorage components provide the perfect solution and meet the latest OSHA and ANSI standards. Know matter what you are connecting to, DBI/SALA has a connector to get the job done and keep you safe in case of a fall.
Building owners and roof maintenance/replacement contractors prefer fall protection systems that are versatile, easy to use and protect the integrity of the roof. DBI-SALA's Roof Top Anchor is the solution. For jobsite versatility the anchor can be installed to both single ply membrane and built-up asphalt roofs. Installation is also extremely fast and easy by core drilling down through the insulation to the metal or wood sheathing and fastening toggle bolts from the top of the roof. Once installed the base is simply covered with the same material used for the membrane or built-up roof and weather sealed together to ensure integrity.