Previous image Next image
Zoom image

Miller Fusion Roof Anchor Post

Permanent or Temporary Solution for Roof Safety

The new versatile, single-point Miller Fusion Roof Anchor Post adapts to a wide range of roof designs with its innovative base plate engineered for temporary or permanent installation to the roof surface.

When properly installed, a dependable fall protection connection is established. Should a fall occur, forces are reduced with its energy-absorbing design to maintain a secure connection to the structure.

The easy-to-install Miller Fusion Roof Anchor Post is designed for quick set-up and does not require roof penetration to sub-surface rafters or trusses.

  • Versatile single-point anchor adapts to a wide range of roof designs - With a variety of models available, the Miller Fusion Roof Anchor Post can accommodate most industrial roof designs including standing seam, membrane, built-up, metal sheathing, concrete and wood.
  • Attaches to the surface of existing roof structures - Quick, easy installation reduces cost requiring minimal labor and eliminating the need for roof penetration and repair.
  • Significantly reduces the fall forces on the roof structure - In the event of a fall, the top of the Miller Fusion Roof Anchor Post reorients with the force in a direct line and activates the patent-pending energy absorber.
  • Durable design that withstands the changing outdoor environment - Internal components are constructed of stainless steel. The steel post and base are plated with zinc followed by a premium powder coating for two layers of protection.
  • Models for steel decking, concrete and wood can be used on other non-roof structures.
  • $411.00
Qty:  
  • Weight
    17.9000 lbs
  • SKU
    X10020


Product Details:

  • Metal sheathing with minimum thickness of 24 gauge (0.024 in. [.61 mm]).
  • Trapezoidal spacing of 8 in. (203 mm) to 20 in. (508 mm) in one-inch increments.
  • Plywood with minimum thickness of 5/8-in. (15.9 mm) CDX.
  • Concrete decking with minimum thickness of 6.5 in. (165 mm) and minimum concrete compressive strength of 3000 PSI (20.7 MPa).

 

Download the User Manual

Download the Brochure

Download the Technical Data Sheet

Product Questions

No questions yet. Be the first to ask the question.